Bright Annealing Finishing Hot Rolled 17-4PH Stainless Steel Bar with OD 3-300mm

証明	ISO, AISI, ASTM, EN, DIN, JIS
最小注文数量	50 kg
価格	US $3.11-3.6 / kg

商品の詳細

形	ラウンド	技術	熱間圧延
表面処理	明るい	直径	8～450mm
長さ	6メートル/個	抗張力	1105～1310MPa
降伏強さ	1000～1170MPa	伸長	10-16%
硬度	28-44HRC	密度	7750kg/m3
熱伝導率	18.4-22.7W/mK	比熱	460 J/kg.K
電気抵抗率	800nΩ・m	熱膨張係数	10.8～11.6μm/m/℃
最高温度	572°F（300°C）
ハイライト	Bright Annealing Finishing Stainless Steel Bar , OD 3-300mm 17-4PH Stainless Steel Bar , Hot Rolled 630 Stainless Steel Bar

メッセージ

製品の説明

Bright Annealing Finishing 17-4PH / DIN 1.4542 / 630 Stainless Steel Bar

High-strength precipitation hardening stainless steel bars with bright annealing finish, available in various diameters and lengths to meet industrial requirements.

Product Specifications

Products	17-4PH Stainless Steel Round Bar
Standard	ASTM GB DIN EN
Diameter	8 - 450mm
Length	6m /pcs or cutting as request
Finishing	black bar / Bright Bar
Main Grades	201 301 303Cu 304 304L 309S 310S 316L 316Ti 317L 318 321 347 410 420 430 431 440a/b/c 904L 2205 2507 Hastelloy C276 C4 C22 Inconel 600 625 Incoloy 800 825 825H etc
Service	Cutting, surface polishing, heat treatment
Brand	Walsin BAOSTEEL TISCO QINGSHAN

Material Description

17-4 Precipitation Hardening (Type 630) is a chromium-copper precipitation hardening stainless steel used for applications requiring high strength and moderate corrosion resistance. High strength is maintained to approximately 600°F (316°C).

General Properties

Alloy 17-4 PH is a precipitation hardening martensitic stainless steel with Cu and Nb/Cb additions. The grade combines high strength, hardness (up to 572°F / 300°C), and corrosion resistance. Mechanical properties can be optimized with heat treatment, achieving very high yield strength up to 1100-1300 MPa (160-190 ksi).

Applications & Standards

Applications	Standards
Offshore (foils, helicopter deck platforms) Food industry Pulp and paper industry Aerospace (turbine blades) Mechanical components Nuclear waste casks	ASTM A693 grade 630 (AMS 5604B) UNS S17400 EURONORM 1.4542 X5CrNiCuNb 16-4 AFNOR Z5 CNU 17-4PH DIN 1.4542

Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Ni	Cu	Nb+Ta
630	min. max: - 0.07	min. max: - 1	min. max: - 1	min. max: - 0.04	min. max: - 0.030	min. max: 15 17.5	min. max: 3 5	min. max: 3 5	min. max: 0.15 0.45

Mechanical Properties

Condition	Tensile Strength (MPa)	Yield Strength 0.2% Proof (MPa)	Elongation (% in 50mm)	Hardness Rockwell C (HR C)	Hardness Brinell (HB)
Solution Treated	1105 typ	1000 typ	15 typ	38 max	363 max
Condition 900	1310 min	1170 min	10 min	40 min	388 min
Condition 1150	930 min	724 min	16 min	28 min	277 min

Physical Properties

Property	Value
Density (kg/m³)	7750
Mean Co-eff of Thermal Expansion 0-100°C (µm/m/°C)	10.8
Mean Co-eff of Thermal Expansion 0-315°C (µm/m/°C)	11.6
Thermal Conductivity at 100°C (W/m.K)	18.4
Thermal Conductivity at 500°C (W/m.K)	22.7
Specific Heat 0-100°C (J/kg.K)	460
Electrical Resistivity (nΩ.m)	800

Grade Specifications

Grade	UNS No	Euronorm	Japanese JIS
630	S17400	1.4542	SUS 630

Alternative Grades Comparison

Alternative Grade	Comparison
431	Higher toughness than 17-4PH, better availability in some sizes
416	Free-machining martensitic stainless steel, better for repetition machining, lower cost
316	Higher corrosion resistance but with much lower strength than 17-4PH
2205	Much better corrosion resistance with lower strength (but not as low as 316)