Todos los productos

Raian Ionescu

Calidad material muy buena. tenemos cooperar más de 10 años. Negocian clases de las porciones de material de acero. Toda la calidad material buena. Ellos deber para toda la calidad material. Estamos acepillando para continuar cooperando con ellos en el futuro

Persona de Contactar Ahora : Gao

Número de teléfono : 18068357371

whatsapp : +8618068357371

CuZn15 Alloy Brass Bar and Rod with Diameter 4-200mm for Custom Cutting

Cantidad de orden mínima	500 kilos
Precio	US $6.95-7.85 / kg

Datos del producto

Diámetro	3 - 250 mm	Longitud	Dentro de los 6m
Densidad	8.5 g/cm3	Dureza	1/16 duro, 1/8 duro, 3/8 duro, 1/4 duro, 1/2 duro, completamente duro, blando
Forma	Cuadrado, rectangular, redondo	Punto de fusión-liquidus	1027ºC
Punto de fusión-solidus	988ºC	Resistencia a la tracción	269-724MPa
Fuerza de producción	69-434MPa	Alargamiento	55%
Ratio de Poisson	0.34	Módulo elástico	117 GPa
Calificación de maquinariabilidad	30	Composición química Cu	85%
Composición química Zn	15%
Resaltar	CuZn15 Alloy Brass Bar , Diameter 4-200mm Brass Rod , Custom Cutting Brass Shaft

Deja un mensaje

Descripción de producto

CuZn15 / C23000 / CW502L / H85 Alloy Brass Bar

Diameter 4-200mm Custom Cutting | Red Brass Alloy Bars & Rods

Product Specifications

Product Types

Brass Bar
Brass Rod
Brass Shaft
Brass Stick

Material Standards

ASTM, AISI, EN, BS, JIS, GB/T, BSI, AS/NZS, ISO, or as required

Available Materials

H96, H90, H85, H80, H70, H68, H65, H63, H62, H60, C21000, C22000, C23000, C24000, C26000, C26800, C27000, C27200, C28000, C35000, or as required

Surface Finish

Mill, polished, bright, oiled, or as required

Density	8.5 g/cm³
Diameter Range	1-200mm
Available Hardness	1/16 hard, 1/8 hard, 3/8 hard, 1/4 hard, 1/2 hard, full hard, soft
Shapes	Square, Rectangular, Round
Length	500-6000mm, or as required

Material Description

Brass refers to a wide range of copper-zinc alloys known for excellent machinability, strength, hardness, wear-resistance, ductility, corrosion-resistance, antimicrobial properties, and electrical/thermal conductivity. UNS C23000 brass alloys are red in color and stronger than C22000 alloys, making them ideal for architectural and design applications where both appearance and performance are important.

Chemical Composition

Element	Content (%)
Copper (Cu)	85
Zinc (Zn)	15

Physical Properties

Properties	Metric	Imperial
Melting point (liquidus)	1027°C	1880°F
Melting point (solidus)	988°C	1810°F
Density @20°C/68°F	8.75 g/cm³	0.316 lb/in³

Mechanical Properties

Properties	Metric	Imperial
Tensile strength	269-724 MPa	39-105 ksi
Yield strength	69-434 MPa	10-70 ksi
Elongation	55%	55%
Poisson's ratio	0.34	0.34
Elastic modulus	117 GPa	16969 ksi

Equivalent Designations

ASME B16.22, ASTM B134, ASTM B687, ASTM B111, ASME B16.29, ASTM B135, ASTM B698, ASME SB543, ASME SB111, ASTM B359, MIL T-20168, ASTM B587, ASME SB359, ASTM B36, QQ W321, ASTM B543, ASME SB395, ASTM B395, SAE J461, ASME SB43, ASTM B43, SAE J463

Fabrication and Heat Treatment

Annealing

426-732°C (800-1350°F)

Cold Working

Excellent cold working capacity

Welding

Brazing, gas shielded arc welding, soldering, butt welding, and spot welding. Coated metal arc welding and seam welding are not recommended.

Forging

788-899°C (1450-1650°F)

Machinability

Machinability rating of 30

Hot Working