All Products
-
Raian IonescuMaterial quality very good. we have cooperate more than 10 Years. They trade lots kinds of steel material. All material quality good. They duty for all material quality. We are planing continue cooperate with them in the future
Hot Rolled DIN 1.4542 17-4PH Stainless Steel Round Bar with Bright Surface and Diameter 8-350mm
Product Details
| Diameter Range | 8 - 450mm | Length | 6m /pcs Or Cutting As Request |
|---|---|---|---|
| Surface Finish | Black Bar / Bright Bar | Main Grades | 201, 301, 303Cu, 304, 304L, 309S, 310S, 316L, 316Ti, 317L, 318, 321, 347, 410, 420, 430, 431, 440a/b/c, 904L, 2205, 2507 |
| Tensile Strength | 1105 - 1310 MPa | Yield Strength | 724 - 1170 MPa |
| Elongation | 10 - 16% | Hardness | 28 - 44 HRC |
| Thermal Conductivity | 18.4 - 22.7 W/m.K | Specific Heat | 460 J/kg.K |
| Electrical Resistivity | 800 NΩ.m | Coefficient Of Thermal Expansion | 10.8 - 11.6 µm/m/°C |
| Density | 7750 Kg/m³ | Solution Treatment Temperature | 1040°C |
| Age Hardening Temperature | 482 - 621°C | ||
| Highlight | Hot Rolled Stainless Steel Round Bar,Bright Surface 17-4PH Stainless Steel Bar,Diameter 8-350mm 630 Stainless Steel Bar |
||
Product Description
DIN 1.4542 Stainless Steel Round Bar
Diameter range: 8 - 350mm SS Bar
Product Specifications
| Products | 17-4PH Stainless Steel Round Bar |
|---|---|
| Standard | ASTM GB DIN EN |
| Diameter | 8 - 450mm |
| Length | 6m /pcs or cutting as request |
| Finishing | black bar / Bright Bar |
| Main Grade | 201 301 303Cu 304 304L 309S 310S 316L 316Ti 317L 318 321 347 410 420 430 431 440a/b/c 904L 2205 2507 Hastelloy C276 C4 C22 Inconel 600 625 Incoloy 800 825 825H.etc |
| Service | Cutting, surface polishing, heat treatment |
| Brand | Walsin BAOSTEEL TISCO QINGSHAN |
Material Description
17-4 Precipitation Hardening (Type 630) is a chromium-copper precipitation hardening stainless steel used for applications requiring high strength and moderate corrosion resistance. High strength is maintained to approximately 600°F (316°C).
General Properties
Alloy 17-4 PH is a precipitation hardening martensitic stainless steel with Cu and Nb/Cb additions. The grade combines high strength, hardness (up to 572°F / 300°C), and corrosion resistance. Mechanical properties can be optimized with heat treatment. Very high yield strength up to 1100-1300 MPa (160-190 ksi) can be achieved.
Applications & Standards
| Applications | Standards |
|---|---|
|
|
Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Ni | Cu | Nb+Ta |
|---|---|---|---|---|---|---|---|---|---|
| 630 | min. max - 0.07 | - 1 | - 1 | - 0.04 | - 0.030 | 15 17.5 | 3 5 | 3 5 | 0.15 0.45 |
Mechanical Properties
| Condition | Tensile Strength (MPa) | Yield Strength 0.2% Proof (MPa) | Elongation (% in 50mm) | Hardness Rockwell C (HR C) | Hardness Brinell (HB) |
|---|---|---|---|---|---|
| Solution Treated | 1105 typ | 1000 typ | 15 typ | 38 max | 363 max |
| Condition 900 | 1310 min | 1170 min | 10 min | 40 min | 388 min |
| Condition 1150 | 930 min | 724 min | 16 min | 28 min | 277 min |
Physical Properties
| Mean Co-eff of Thermal Expansion (µm/m/°C) | Thermal Conductivity (W/m.K) | Specific Heat 0-100°C (J/kg.K) | Elec Resistivity (nΩ.m) |
|---|---|---|---|
| 0-100°C: 10.8 0-315°C: 11.6 |
At 100°C: 18.4 At 500°C: 22.7 |
460 | 800 |
Product Images
Applications
- Engine components
- High strength and boat propeller shafts
- Plastic moulding dies
- Valves and gears
Contact Information
Recommended Products