0.8-2.0mm Stainless Steel Strip AISI 439 EN 1.4509 Stainless Steel Roll

AISI439 Stainless Steel Strip EN 1.4509 Stainless Steel Roll 439 Stainless Strips Thickness 0.8-2.0mm

Astm A240 Type 439 - UNS S43035:

AISI Type 439 Stainless Steel Sheet (also known as ASTM XM-8) is a ferritic stainless steel designed to resist corrosion in a variety of oxidizing environments from fresh water to boiling acids. Type 439 Stainless Steel Sheet is a titanium stabilized, 18 percent chromium alloy that may be used in many oxidizing environments where Type 304 SS Sheet is considered adequate in terms of general corrosion resistance but is subject to chloride stress corrosion cracking. It is often used in place of Type 439 Stainless Steel where higher thermal conductivity is required. Type 439 Stainless Steel Sheet does not require annealing after welding to restore ductility or to provide intergranular corrosion resistance. Type 439 Stainless Steel Sheet also has superior formability capabilities and is heavily used in the automotive industry; it can be work hardened slightly to increase tensile strength.

Astm A240 Type 439 Corrosion Resistance:

AISI Type 439 Stainless Steel is resistant to attack by potable water and many mildly or moderately corrosive chemical environments which are oxidizing in nature. In various chloride solutions, studies have shown pitting resistance of Type 439 Stainless Steel to be superior to that of Type 304 Stainless Steel. In addition, Type 439 Stainless Steel is not subject to stress corrosion cracking which may cause premature failure of austenitic steels in chloride bearing environments such as hot waters used in heat exchangers.

439 SS Physical Properties:

• Melting Point: 2741°F (1505°C)
• Density: 0.278 lbs/in3 / 7.70 g/cm3
• Modulus of Elasticity in Tension: 28 X 106 psi / 193 GPa

439 SS Corrosion Resistance:

AISI Type 439 Stainless Steel is resistant to attack by potable water and many mildly or moderately corrosive chemical environments which are oxidizing in nature. In various chloride solutions, studies have shown pitting resistance of Type 439 Stainless Steel to be superior to that of Type 304 Stainless Steel. In addition, Type 439 Stainless Steel is not subject to stress corrosion cracking which may cause premature failure of austenitic steels in chloride bearing environments such as hot waters used in heat exchangers.

439 SS Mechanical Properties:

• Tensile Strength Minimum (psi): 66,000 - 70,000
• Yield Strength Minimum 0.2% offset (psi): 43,000 - 48,000
• % Elongation in 2” Minimum: 32 - 36%
• Hardness: Rockwell B74 - 78

439 SS Composition:

• Carbon: 0.025 max
• Manganese: 0.50
• Chromium: 17.00 - 19.00
• Nickel: 0.50
• Silicon: 0.75
• Titanium: ≥ 0.20+4(C+N)min - 0.50 max
• Iron: Balance
• All values are maximum values unless otherwise specified. Values derived from applicable AMS and ASTM specifications.