All Products

Raian Ionescu

Material quality very good. we have cooperate more than 10 Years. They trade lots kinds of steel material. All material quality good. They duty for all material quality. We are planing continue cooperate with them in the future

Contact Person : Gao Ben

Phone Number : 18068357371

Whatsapp : +8618068357371

EN 10088 1.4319 Stainless Steel Strip 0.1 - 3.0mm SS Strip with EN 10204-3.1 Certificate

Certification	AISI, ASTM, EN, DIN
Minimum Order Quantity	55 kg
Price	US $2.21-4.21 / kg

Product Details

Thickness	0.1 - 3.0mm	Width	10 - 1219mm
Surface Treatment	2B, Bright, Hairline	Hardness	1/4H 1/2H 3/4H FH Or As Request
Tensile Strength	758 - 1276 MPa	Yield Strength	276 - 965 MPa
Elongation	9 - 60%	Density	7880 Kg/m3
Elastic Modulus	193 GPa	Thermal Expansion	16.9 μm/m/°C
Thermal Conductivity	16.2 W/m.K	Specific Heat	500 J/kg.K
Electrical Resistivity	695 NΩ.m	Composition C	0.15 Max
Composition Cr	16.0 - 18.0
Highlight	EN 10088 1.4319 Stainless Steel Strip , 0.1 - 3.0mm SS Strip , EN 10204-3.1 Certificate Metal Strip

Leave a Message

Product Description

EN 10088 1.4319 Stainless Steel Strips & Coils

High-quality stainless steel strips and coils with thickness range of 0.1-3.0mm, supplied with EN 10204-3.1 certification for guaranteed quality assurance.

Product Name: 301 Stainless Steel Strips

Thickness: 0.1 - 3.0mm

Surface Finish: 2B, Bright, Hairline

Width: 10 - 1219mm

Standards: ASTM A240 / JIS G4305 / EN 10088

Hardness: 1/4H, 1/2H, 3/4H, FH or Custom

Other Grades: 201, 202, 301, 304, 304L, 309S, 310S, 316L, 410, 420, 430, 440

Minimum Order: 300 Kgs

Grade 301 stainless steel is typically supplied as strips and wires, achieving tensile strengths up to 1800 MPa across tempers ranging from 1/16 Hard to Full Hard. Through controlled analysis, this grade maintains sufficient ductility even in ½ hard conditions, making it suitable for aircraft components, rail car structures, and architectural applications. Higher tempers (¾ to full hard) provide excellent wear resistance and spring characteristics for simple form designs.

Grade Variants

301L: Low carbon variant offering superior ductility for demanding forming applications.

301LN: Higher nitrogen content variant with increased work hardening rate, specified in EN10088-2 as grade 1.4318.

Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Ni	N
301 ASTM A666	≤0.15	≤2.0	≤1.0	≤0.045	≤0.030	16.0-18.0	6.0-8.0	≤0.10
301L JIS G4305	≤0.03	≤2.0	≤1.0	≤0.045	≤0.030	16.0-18.0	6.0-8.0	≤0.20
1.4318/301LN EN 10088-2	≤0.03	≤2.0	≤1.0	≤0.045	≤0.015	16.5-18.5	6.0-8.0	0.10-0.20

Mechanical Properties

Grade 301 Temper ASTM A666	Tensile Strength (MPa) min.	Yield Strength 0.2% Proof (MPa) min.	Elongation (% in 50mm) min.	Bend Angle (°)	Bend Factor
Annealed	758	276	60	-	-
1/16 Hard	620	310	40	180	1
1/8 Hard	690	380	40	180	1
1/4 Hard	862	514	25	90	2
1/2 Hard	1034	758	18	90	2
3/4 Hard	1205	930	12	90	3
Full Hard	1276	965	9	90	5

Physical Properties

Property	Value
Density (kg/m³)	7880
Elastic Modulus (GPa)	193
Thermal Expansion 0-100°C (μm/m/°C)	16.9
Thermal Conductivity at 100°C (W/m.K)	16.2
Specific Heat 0-100°C (J/kg.K)	500
Electrical Resistivity (nΩ.m)	695

Performance Characteristics

Corrosion Resistance

Grade 301 offers corrosion resistance comparable to 304 stainless steel, providing reliable performance in mildly corrosive environments at ambient temperatures.

Heat Resistance

Excellent oxidation resistance for intermittent service up to 840°C and continuous service up to 900°C.

Heat Treatment

Solution treatment annealing at 1010°C to 1120°C followed by rapid cooling. Intermediate annealing utilizes lower temperature ranges. Thermal hardening is not suitable for this grade.

Cold Working

Grade 301 and its low carbon variants are primarily used as high-strength stainless steels with exceptional work hardening rates (approximately 14MPa increase per 1% reduction in area). Cold rolling and forming operations can achieve high strengths while maintaining residual ductility. The alloy transitions from non-magnetic in annealed condition to strongly magnetic when cold worked.

Welding

Compatible with all standard welding methods using 308L filler metal. Post-weld annealing is recommended for grade 301 to maximize corrosion resistance, while 301L and 301LN variants do not require annealing. Spot welding effectively assembles cold-rolled components without compromising strength.

Applications