All Products
-
Stainless Steel Strip
-
Stainless Steel Sheet
-
Stainless Steel Plate
-
Stainless Steel Pipe
-
Stainless Steel Bar
-
Galvanized Steel Coil
-
Steel Plate
-
Steel Round Bar
-
Nickel Alloy
-
Seamless Steel Pipe
-
Stainless Steel Beam
-
Copper Plate Sheet
-
Copper Round Bar
-
stainless steel round bar
-
stainless steel channel bar
-
stainless steel angle bar
-
stainless steel coil strip
-
stainless steel flat bar
-
stainless steel circle
-
Pipe Fitting
-
Water Ripple Stainless Steel Sheet
-
Nickel Alloy and Super Alloy
-
cold rolled steel coil
-
copper
-
Nickel Base Alloy Products
-
Others
-
Raian IonescuMaterial quality very good. we have cooperate more than 10 Years. They trade lots kinds of steel material. All material quality good. They duty for all material quality. We are planing continue cooperate with them in the future
Inconel 600 Nickel-Chromium Alloy Plate 3mm Thickness Hot Rolled with Polished Surface
Product Details
| Thickness | 3mm | Width | 1200mm |
|---|---|---|---|
| Length | 3000mm | Material Grade | Inconel 600 |
| UNS Number | N06600 | Nickel Content | 72.0-76.0% |
| Chromium Content | 14.0-17.0% | Iron Content | 6.0-10.0% |
| Carbon Content | ≤0.15% | Manganese Content | ≤1.0% |
| Silicon Content | ≤0.5% | Sulfur Content | ≤0.015% |
| Ultimate Tensile Strength | 760 MPa | Yield Strength | 585 MPa |
| Elongation | 10% | ||
| Highlight | 3mm Thickness Inconel 600 Plate,Hot Rolled Nickel-Chromium Alloy Plate,Polished Surface UNS N06600 Plate |
||
Product Description
Inconel 600 Plate 3mm X 1200 X 3000 DIN 2.4816
Product Overview
Inconel 600 (UNS N06600) is a nickel-chromium alloy designed for use from cryogenic to elevated temperatures up to 2000°F (1093°C). This high-performance material offers excellent oxidation resistance, good mechanical properties, and superior corrosion resistance in various demanding environments.
Chemical Composition
Ni 72.0%, Cr 15.5%, Fe 8.0%, Mn 1.0%, C 0.15%, Cu 0.5%, Si 0.5%, S 0.015%
Key Characteristics
- Resistant to wide range of corrosive media including organic acids
- Virtually immune to chloride ion stress corrosion cracking
- Excellent resistance to alkaline solutions and sulfur compounds
- Good oxidation resistance at elevated temperatures
- Non-magnetic with high strength and good workability
- Readily weldable with cold forming characteristics
Typical Applications
- Thermocouple sheaths and furnace components
- Chemical and food processing equipment
- Heat exchanger tubing and reactor vessels
- Nuclear reactor components
- Process equipment for chlorinated and fluorinated hydrocarbons
- Vinyl chloride monomer production equipment
Chemical Requirements
| Element | Min (%) | Max (%) |
|---|---|---|
| Ni | 72.0 | - |
| C | - | 0.15 |
| Mn | - | 1.0 |
| Cr | 14.0 | 17.0 |
| S | - | 0.015 |
| Si | - | 0.5 |
| Fe | 6.0 | 10.0 |
Mechanical Properties
| Condition | Ultimate Tensile (min) | Yield Strength (0.2% OS, min) | Elongation (min, %) |
|---|---|---|---|
| Cold Worked | 110 KSi / 760 MPa | 85 KSi / 585 MPa | 10 |
| Hot Worked | 90 KSi / 620 MPa | 40 KSi / 275 MPa | 25 |
Specifications
| Form | Standard |
|---|---|
| Metal Type | UNS N06600 |
| Bar | ASTM B166, AMS 5665, DIN 17752 |
| Sheet/Plate | ASTM B168, AMS 5540, DIN 17750 |
| Tube/Pipe | ASTM B167 |
| Forging | ASTM B564, DIN 17754 |
| DIN | 2.4816 |
Machining Data
| Operation | Parameters |
|---|---|
| Single Point Turning | Roughing: 0.15" depth, 0.015"/rev feed, 175 SFM Finishing: 0.025" depth, 0.007"/rev feed, 200 SFM |
| Drilling | 1/4" Dia: 0.004"/rev feed, 60 SFM 1/2" Dia: 0.007"/rev feed, 60 SFM 3/4" Dia: 0.010"/rev feed, 60 SFM |
| Reaming | Feed same as drilling, 100 SFM |
| Side and Slot Milling | Roughing: 0.25" depth, 0.007"/tooth feed, 125 SFM Finishing: 0.050" depth, 0.009"/tooth feed, 140 SFM |
Note: Carbide tools recommended (C-2 for roughing, drilling, reaming; C-3 for finishing)
Product Packaging
Recommended Products