모든 제품

라이안 이오네스쿠

매우 좋은 소재 품질. 우리는 10년 이상을 협력하게 합니다. 그들은 강철 소재의 다량 종류를 거래합니다. 좋은 모든 소재 품질. 그들 모든 소재 품질을 위한 의무. 우리는 활공하고 있고 계속되고 미래에 그들과 협력합니다

담당자 : Gao

전화 번호 : 18068357371

왓츠앱 : +8618068357371

Cold Rolled Bright Surface Corrosion Resistant Stainless Steel Sheet and Coil ASTM A240 AISI 444

인증	AISI, ASTM
최소 주문 수량	100kg
가격	US $2.55-3.68 / kg

제품 상세 정보

모델 번호	444 443 441 436엘 409엘 410 420	모양	평평한
기술	냉간 압연	표면 처리	밝은
사양	12202440, 15003000, 15006000, 20006000mm	생산능력	500000kg
탄소 함량	0.025 맥스	망간계 콘탠츠	1.00 맥스
실리콘 함량	0.60	크로미움 콘탠츠	17.50-19.50
몰리브덴 함량	1.75-2.50	밀도	7.75 G/cm3
전기 저항력	57마이크로옴-cm	열전도율	26.8W/m•K
탄성 계수	200×103MPa
강조하다	Cold Rolled Stainless Steel Sheet , Bright Surface Stainless Steel Coil , Corrosion Resistant Stainless Steel Strip

메시지를 남겨주세요

제품 설명

ASTM A240 AISI 444 Stainless Steel Sheet, Coil & Strip

SUS444 stainless steel sheet, also known as AISI 444 or EN 1.4521, is a dual-stabilized ferritic stainless steel containing 2% molybdenum. This grade offers excellent corrosion resistance comparable to austenitic grades 4401/4404, with higher strength values due to molybdenum alloying.

Product Overview

Grade Specifications

EN 1.4521 / AISI 444 is equivalent to ASTM 444 standard. Stabilized with both titanium and niobium, this grade achieves elongation to fracture values up to 30% (A80) and features improved surface properties.

Key Applications

Heat exchangers, boilers, and water heaters
Stainless steel water tanks
Pipes for tap water and drinking-water environments
Solar water heaters
Food processing equipment
Brewery and wine making equipment
Automotive components

Technical Properties

Chemical Composition (Typical)

Element	Content (%)
Carbon	0.025 max
Manganese	1.00 max
Silicon	0.60
Chromium	17.50-19.50
Nickel	1.00 max
Molybdenum	1.75-2.50
Titanium + Columbium	0.20 + 4x (C+N) min - 0.80 max
Phosphorus	0.040 max
Sulfur	0.030 max
Iron	Balance

Physical Properties

Property	Value
Density	0.28 lbs/in³ (7.75 g/cm³)
Electrical Resistivity	22.50 μΩ·in (57 μΩ·cm) at 68°F (20°C)
Specific Heat	0.102 BTU/lb·°F (0.427 kJ/kg·K)
Thermal Conductivity	15.5 BTU/hr/ft²/ft/°F (26.8 W/m·K)
Thermal Expansion	6.1 × 10⁻⁶ in/in/°F (11.0 μm/m·K)
Modulus of Elasticity	29 × 10³ ksi (200 × 10³ MPa)
Magnetic Permeability	Magnetic
Melting Range	2700 - 2790°F (1482 - 1532°C)

Mechanical Properties (Annealed)

Property	Value
Ultimate Tensile Strength	60 KSI min (414 MPa min)
Yield Strength (0.2% offset)	40 KSI min (276 MPa min)
Elongation	22% min
Hardness	Rb 90 max

Material Characteristics

Corrosion Resistance

Grade 1.4521 offers molybdenum-alloyed ferritic steel with localized corrosion resistance close to grade 1.4404/AISI 316. Excellent resistance to chloride-induced stress corrosion cracking. Refer to NACE for specific corrosion recommendations.

Formability

Excellent cold-forming capabilities with particular suitability for deep drawing. Comparable deep drawability to deep drawing quality carbon steels. Lower work hardening rate than standard austenitic grades.

Welding

Better weldability than many ferritic steels due to low C and N contents with titanium and niobium stabilization. Grain growth in HAZ limits heat input. Austenitic fillers typically used. Refer to SSINA's "Welding of Stainless Steels" for best practices.

Available Forms & Finishes

Forms

Coil - Strip, Foil, Ribbon
Wire - Profile, Round, Flat, Square

Sheet Finishes

#1 - Hot rolled annealed and descaled
#2D - Dull finish for deep drawn parts
#2B - Smooth finish with brighter appearance
#BA - Bright annealed cold rolled
#CBA - Course bright annealed matte finish
#2 - Cold Rolled
#2BA - Smooth glossy finish
Polished - Various grit finishes

Wire Finishes

XC - Extra clean bright annealed
Grease - Ultra-bright decorative finish
Soap - Lubricated tempered wire

Not all finishes available for all alloys - Contact sales for availability

Product Images

꼬리표:

Cold Rolled Bright Surface Corrosion Resistant Stainless Steel Sheet and Coil ASTM A240 AISI 444

Cold Rolled Stainless Steel Sheet

Bright Surface Stainless Steel Coil

Corrosion Resistant Stainless Steel Strip