-
Raian IonescuMaterial quality very good. we have cooperate more than 10 Years. They trade lots kinds of steel material. All material quality good. They duty for all material quality. We are planing continue cooperate with them in the future
ASTM A240 309S Stainless Steel Plate 3.0 - 16.0mm TISCO 1219mm

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProducts | Stainless Steel Plate | Grade | 309S |
---|---|---|---|
Thickness | 3.0 - 16.0mm | Width | 1500mm 1219mm 1000mm 2000mm |
Surface | NO.1 2B | Brand | TISCO |
Standard | ASTM A240/240M | Loading Port | Shanghai Port |
Highlight | TISCO Stainless Steel Plate,ASTM 309S Stainless Steel Plate,1219mm 309S Stainless Steel Plate |
Grade 309S Stainless Steel Plate Thickness 3.0 - 16.0mm TISCO SS Plate ASTM A240
The corresponding Chinese grade of 309S is 0Cr23Ni13, and the characteristics and uses of American Standard S30908 (American AISI, ASTM): corrosion resistance and heat resistance are better than 0Cr19Ni9.
309s is a lower carbon variant of 309 stainless steel used where welding is required. The lower carbon content minimizes carbide precipitation in the heat-affected zone near the weld, which can lead to intergranular corrosion (weld erosion) of stainless steel in some environments.
It can withstand repeated heating below 980 °C, and has high high temperature strength, oxidation resistance and carburization resistance.
Standard Specification Of 309S Plate
Thickness | 4mm-100mm | ||||||
Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc | ||||||
Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc | ||||||
Surface | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc | ||||||
Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) | ||||||
Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
309S stainless steel composition content.
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
309S | Min. Max. |
≤0.08 | ≤2.0 | ≤1.00 | ≤0.045 | ≤0.03 | 22.0-24.0 | / | 12.0-15.0 |
- Yield strength/Mpa: ≥ 205
- Tensile strength /MPa: ≥515
- Elongation /% : ≥ 40
- Section reduction rate /% : ≥50
309S Characteristic machining technology
1D — The surface has discontinuous granular shape, also known as fog surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2D – A slightly silvery white colour.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2B — Silver white with better gloss and flatness than a 2D surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + quenching and tempering rolling.
Ba – Excellent surface gloss, high reflectivity, like a mirror surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + surface polishing + quenching and tempering rolling.
No.3 — Good gloss, coarse grain surface.
Processing technology: polishing and tempering rolling for 2D or 2B with 100~120 abrasive materials (JIS R6002).
No.4 — Good gloss, fine lines on the surface.
Processing process: polishing and tempering rolling for 2D or 2B with 150~180 abrasive materials (JIS R6002).
HL — Silver grey with hair streaks.
Processing technology: 2D products or 2B products with appropriate granularity of abrasive materials for polishing the surface is a continuous abrasive grain.
MIRRO — Specular.
Processing technology: 2D products or 2B products with appropriate granularity of the grinding material grinding and polishing to the mirror effect.