201 Wide Flange Stainless Steel Beam 6m Pickling Finishing

201 Stainless Steel Beam / H Beam / Stainless Steel Wide Flange Beam Custom Size SS Beam

Specification of our stainless steel beam

About Stainless Steel H-Beams

H section steel is a kind of cross section area allocation optimization, strong heavy than more reasonable economic section of high profile, because of H beam's cross section the same as the English letter "H" the name. Since the different parts of h-beam with orthogonal configuration, so H-beam in all directions has bending ability strong, easy construction, cost saving and structure light weight etc, has been widely used.

201 Stainless Steel

201 is a kind of stainless steel. 201 stainless steel generally refers to 201 stainless steel and acid resistant steel. 201 stainless steel refers to the steel that is resistant to the corrosion of weak media such as atmosphere, steam and water, while acid resistant steel refers to the steel that is resistant to the corrosion of chemical corrosive media such as acid, alkali and salt.This product is a high manganese and low nickel stainless steel with low nickel content and poor corrosion resistance. It is widely used in various tabletops, countertops, kitchenware, outdoor decoration engineering, urban decoration industry and low-grade household products.

H-Beam's Features:

1.Wide flange, high lateral stiffness.

2.H-beam has good bending resistance, about 5%-10% better than i-bar.

3.The two surfaces of flange are parallel to each other, which makes connection, processing and installation easy.

4.Compared with welding i-steel, H beam is low cost, high precision, small residual stress, no need for expensive welding materials and weld inspection, saving about 30% of the production cost of steel structure.

5.Under the same section load, the weight of hot-rolled H beam steel structure can be reduced by 15%-20% compared with traditional steel structure.

6.Compared with concrete structure, hot-rolled H beam steel structure can increase the usable area by 6%, reduce the dead weight by 20%-30%, and reduce the internal force of structure design.

7.H-beam can be processed into T beam, honeycomb beam can be combined to form a variety of sections, greatly meet the needs of engineering design and production.