Custom Cutting 321 Stainless Steel Round Bar with Cold Rolled Technique and Bright Surface

인증	AISI
최소 주문 수량	50kg
가격	US $2.48-3.98 / kg

제품 상세 정보

모양	둥근	기술	냉간 압연
표면 처리	밝은	지름	8 - 300mm
길이	6m/pcs	등급	321 / 1.4541 / UNS S32100
기준	ASTM A276/276M	인장강도	515 MPa
항복 강도	205 MPa	연장	40%
경도 로크웰 B	95시간 B	경도 브리넬	217HB
탄소 함량	최대 0.08%	크로미움 콘탠츠	17.0~19.0%
니켈 함량	9.0~12.0%
강조하다	Custom Cutting Stainless Steel Round Bar , Cold Rolled Stainless Steel Bar , Bright Surface 321 Stainless Steel Rod

메시지를 남겨주세요

제품 설명

Custom Cutting 321 Stainless Steel Round Rod / Stainless Steel Bar Cutting Without Burr

Product Specification

Products	Stainless Steel Round Bar
Grade	321 / 1.4541 / UNS S32100
Standard	ASTM A276/276M
Diameter	8 - 300mm
Length	6m/pcs or cutting any length as request
Surface	black, bright
Other Grade	304 310S 316L 317L 321 410 420 431 440A/B/C 2205 2507 630 631 904L.etc
Service	Cutting, polishing, heat treatment

Stainless Steel Bar Product Range

Products Name	Size Range	Mainly Grade
Stainless Steel Round Bar (hot rolled black surface)	8 - 300mm	304 304L 309S 310S 316L 316Ti 317L 321 347 410 420 431 440A/B/C 2205 2507 904L 254SMO 17-4PH 17-7PH.etc
Stainless Steel Round Bar (bright polished)	3 - 50mm	201 304 316L 310S 2205 630.etc
Stainless Steel Square Bar	44 - 5050mm	201 304 316L 310S 410 420 .etc
Stainless Steel Hexagon Bar	S4-S70	201 304 316L 310S 410 420 .etc
Stainless Steel Flat Bar	103 - 10040	304 304L 309S 310S 316L 316Ti 317L 321 347 410 420 431 440A/B/C 2205 2507 904L 254SMO 17-4PH 17-7PH.etc
Stainless Steel Angle Bar	3030 - 200200	201 304 316L 310S 2205.etc
Stainless Steel Channel Bar	5025 - 200100	201 304 316L 310S 2205.etc

About 321 Stainless Steel

Alloy 321 (UNS S32100) is stabilized stainless steel plate which offers as its main advantage an excellent resistance to intergranular corrosion following exposure to temperatures in the chromium carbide precipitation range from 800 to 1500°F (427 to 816°C). Alloy 321 stainless steel plate is stabilized against chromium carbide formation by the addition of titanium.

Alloy 321 stainless steel plate is also advantageous for high temperature service because of its good mechanical properties. Alloy 321 stainless steel plate offers higher creep and stress rupture properties than Alloy 304 and, particularly, Alloy 304L, which might also be considered for exposures where sensitization and intergranular corrosion are concerns.

Alloy 321 (UNS S32100) is titanium stabilized austenitic stainless steel plate with good general corrosion resistance. It has excellent resistance to intergranular corrosion after exposure to temperatures in the chromium carbide precipitation range of 800 - 1500°F (427 - 816°C). The alloy resists oxidation to 1500°F (816°C) and has higher creep and stress rupture properties than alloys 304 and 304L. It also possesses good low temperature toughness.

Alloy 321H (UNS S 32109) stainless steel plate is the higher carbon (0.04 - 0.10) version of the alloy. It was developed for enhanced creep resistance and for higher strength at temperatures above 1000°F (537°C). In most instances, the carbon content of the plate enables dual certification.

Alloy 321 stainless steel plate cannot be hardened by heat treatment, only by cold working. It can be easily welded and processed by standard shop fabrication practices.

Composition of 321 Stainless Steel

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N	Other
321	- 0.08	2.00	0.75	0.045	0.030	17.0 19.0	-	9.0 12.0	0.10	Ti=5(C+N) 0.70
321H	0.04 0.10	2.00	0.75	0.045	0.030	17.0 19.0	-	9.0 12.0	-	Ti=4(C+N) 0.70
347	0.08	2.00	0.75	0.045	0.030	17.0 19.0	-	9.0 13.0	-	Nb=10(C+N) 1.0