すべての製品
-
Raian Ionescuよい物質的な質非常に。私達は協力することを持っている10年以上。それらはロットの種類の鋼鉄材料を交換する。よいすべての物質的な質。それらすべての物質的な質のための義務。私達はそれらに将来協力し続けるために平になっている
Hot Rolled 1Cr13MoS AISI 410MOD X10CrMoS13 Stainless Steel Round Bar OD 120mm GB/T20878-2007
商品の詳細
| 表面処理 | 油漬け 鮮やかに 磨かれたサテン | タイプグレード | AISI 410MOD X10CrMoS13 1Cr13MoS |
|---|---|---|---|
| 直径 | 5.5～150mm | 品質基準 | ASTM,EN,JIS |
| 材質グレード | AISI 410MOD X10CrMoS13 1Cr13MoS | 仕様 | カスタマイズ可能 |
| サイズ範囲 | 直径0.3~130mm,その他は要求に応じて | 抗張力 | 520～750MPa |
| 幅 | 各種幅 | 貿易条件 | FOB、CIF、CRF、EXW |
| 製品名 | ステンレス棒 | パッキング | 耐航性のあるパッキング |
| 仕様 | EN 10088-3 | パッケージ | 標準耐航パッケージ |
| 材料のカスタマイズ | はい |
製品の説明
Hot Rolled 1Cr13MoS AISI 410MOD X10CrMoS13 Stainless Steel Round Bar OD 120mm GB/T20878-2007
|
Product
|
Stainless Steel Bar
|
||
|
Standard
|
ASTM A479,ASTM A276,ASTM A484, ASTM A582,
ASME SA276, ASME SA484, GB/T1220, GB4226, etc. |
||
|
Material
|
301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 310S, 201,202
321, 329, 347, 347H 201, 202, 410, 420, 430, S20100, S20200, S30100, S30400, S30403, S30908, S31008, S31600, S31635, 1Cr13MoS etc. |
||
|
Specifications
|
Round bar
|
Diameter:0.1~500mm
|
|
|
Hexagonal bar
|
Size: 2mm~100mm
|
||
|
Flat bar
|
Thickness
|
0.3~200mm
|
|
|
Width
|
1~2500mm
|
||
|
Square bar
|
Size: 1mm*1mm~800mm*800mm
|
||
|
Length
|
2m, 5.8m, 6m, or as required.
|
||
|
Surface
|
Black, peeled, polishing, bright, sand blast, hair line, etc.
|
||
| Technique | Forged/Hot Rolled/Cold Drawn/Peeled |
| Category |
1.Round bar 1)Hot rolled black bar: (5-400)x6000mm or according to your requirement. 2)Acid round bar: (5-400)x6000mm or according to your requirement. 3)Cold drawn bright bar: (1-20)x6000mm or according to your requirement. 4)Polishing round bar: (5-400)x6000mm or according to your requests. |
|
2. Square bar 1)Hot rolled black bar: (5*5-400*400)x6000mm or according to your requests. 2)Acid square bar: (5*5-400*400)x6000mm or according to your requests. 3)Cold drawn square bar: (1*1-20*20)x6000mm or according to your requests. 4)Polishing square bar: (5*5-400*400)x6000mm or according to your requests. |
|
|
3. Flat bar 1)Hot rolled flat bar: (3-30)*(10-200mm)*6000mm or according to your requests. 2)Cold drawn flat bar: (3-30)*(10-200mm)*6000mm or according to your requests. |
|
|
4. Hexagon bar 1)Hot rolled hexagon bar: (5-100)x6000mm or according to your requests. 2) Acid hexagon bar: (5-100)x6000mm or according to your requests. 3)Cold drawn hexagon bar: (1-20)x6000mm or according to your requests t. 4)Polishing hexagon bar: (5-100)x6000mm or according to your requests. |
|
|
5. Channel bar 1)Hot rolled channel bar: (5-100)x6000mm or according to your requests. 2)Acid channel bar: (5-100)x6000mm or according to your requests. 3)Cold drawn channel bar: (1-20)x6000mm or according to your requests. |
|
|
6. Threaded bar 1)Hot rolled threaded bar: (5-100)x6000mm or according to your requests. 2)Acid threaded bar: (5-100)x6000mm or according to your requests. 3)Cold drawn threaded bar: (1-20)x6000mm or according to your requests. |
|
|
7. Angle bar 1)Hot rolled angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests 2)Acid angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests. 3)Cold drawn angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or according to your requests. |
|
| Diameter± | H9 tolerance can reach the industry standard |
| Quality | Our production equipment 24 hours of continuous temperature work, to ensure the unity of the product roundness, elongation, tensile strength and yield strength. Welcome customers to our company to detect the products before shipment. For the customers who are not inconvenient, quality assurance can be laid down in the contract, we will take charge of the returning and shipping fee if there is any problems of the product quality, so it will dismiss any of your worry about our products. |
| Package | Standard seaworthy packing(plastic&wooden) or according to the customer's requests |
| Delivery time | 7-30days, according to the quantity |
| Productivity | 4500 tons/month |
| Remarks | OEM/Sample/Mixed item/Factory visit are welcome |
As a martensitic stainless steel specifically designed for wear-resistant applications, 1Cr13MoS is charrized by its core alloying features: 11.50%-13.50% chromium, 0.30%-0.60 molybdenum, and 0.15%-0.30% sulfur.
Through a composition design of "chromium for corrosion resistance foundation molybdenum for matrix strength rnforcement sulfur for self-lubricating phase formation," it forms a stable martensitic structure after quenching and tempering.
This allows it to resist mild corrosion basic oxide film formed by chromium, enhance matrix hardness and wear resistance through the solid solution strengthening of molybdenum, and reduce the coefficient of friction through the selfating effect of sulfide phases formed by sulfur with manganese and iron during friction. Its composite characteristics of "wear resistance self-lubrication mild corrosion resistance" address industryts regarding insufficient wear resistance in traditional martensitic stainless steels and rust susceptibility in ordinary wear-resistant steels, making it widely used in scenarios where friction wear and mild corroion coexist, such as machinery manufacturing, petrochemicals, textile machinery, and valve fittings. Based on its core performance, different countries have established differentiated standard systems and application specifications,tailed below:
I. Corresponding Designations of 1Cr13MoS in Various Countries National Standard: 1Cr13MS (GB/T 1221), the basic designation for this material, which specifies its chemical composition, heat treatment process, and mechanical property requirements. It is a common identifier in the domestic wear-resistant stainlesssteel field, focusing on applications for mechanical structural components.
American Standard: AISI 410MOD (UNS S41000 modified). There is no exact equivalent de in the US; equivalent performance is typically achieved by adjusting the molybdenum and sulfur content based on 410 stainless steel. Composition requirements can be specified by agreemet in ASTM A276, suitable for industrial machinery applications.
European Standard: X10CrMoS13 (EN 1.4105 modified). Europe adjuts the molybdenum content based on 1.4105 to form the corresponding grade. DIN 17440 specifies special regulations for its wear resistance, suitablel mechanical wear parts.
Japanese Standard: SUS 410J1MOD (JIS G4303). Japan adds sulfur to SUS 4 to form the suitable grade, optimizing machinability and wear resistance. It is mainly used in textile machinery and precision molds.
-
C
0.08-0.18
-
Si
≤0.6
-
Mn
≤1
-
P
≤0.04
-
S
≤0.03
-
Cr
11.5-14
-
Ni
≤0.6
-
Cu
≤0.3
-
Mo
0.3-0.6
FAQ
Q1. What are your company's main products ?
A1: Our main products are stainless steel plate/sheet, coil, round/square pipe, bar, channel, etc.
Q2. Where is your factory ?
A2: Our company's processing center is located in Jiangsu, Wuxi, China.
Which is well equipped with kinds of machines, such as laser cutting machine,mirror polishing machine and so on.
We can provide a wide range of personalized services according to the customers' needs.
A1: Our main products are stainless steel plate/sheet, coil, round/square pipe, bar, channel, etc.
Q2. Where is your factory ?
A2: Our company's processing center is located in Jiangsu, Wuxi, China.
Which is well equipped with kinds of machines, such as laser cutting machine,mirror polishing machine and so on.
We can provide a wide range of personalized services according to the customers' needs.
Q3:How to confirm the Product Quality before placing orders?
A3:You can get free samples for some products,you only need to pay the shipping cost or arrange a courier to us and take the samples. The third-party will be accepted.
Q4. What are the advantages of your company ?
A4: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.
Q5. How many coutries you already exported ?
A5: Exported to more than 50 countries mainly from America, UK, Kuwait, Egypt,Turkey, Jordan, India, etc.
Q6:What is your delivery time?
A6: For stocks, we could transport the goods to loading port within 7 days after we received your deposit
For production period, it usually takes about 15 days-30 days after receiving the deposit.
Q7. Can you provide sample ?
A7: Small samples in store and can provide the samples for free.
Customized samples will take about 5-7days.