Tutti i prodotti
-
Striscia di acciaio inossidabile
-
Strato di acciaio inossidabile
-
Piatto di acciaio inossidabile
-
tubo di acciaio inossidabile
-
Acciaio inossidabile Antivari
-
Bobina d'acciaio galvanizzata
-
Piatto d'acciaio
-
tondino d'acciaio
-
lega di nichel
-
Tubo d'acciaio senza cuciture
-
Fascio di acciaio inossidabile
-
Strato del piatto di rame
-
Tondino di rame
-
stainless steel round bar
-
stainless steel channel bar
-
stainless steel angle bar
-
stainless steel coil strip
-
stainless steel flat bar
-
stainless steel circle
-
Pipe Fitting
-
Water Ripple Stainless Steel Sheet
-
Nickel Alloy and Super Alloy
-
cold rolled steel coil
-
copper
-
Nickel Base Alloy Products
-
Others
-
Raian IonescuQualità materiale molto buona. abbiamo cooperare più di 10 anni. Vendono i generi dei lotti di materiale d'acciaio. Tutta la qualità materiale buona. Essi dovere per tutta la qualità materiale. Stiamo spianando per continuare a cooperare in futuro con loro
Hot Rolled 430 Stainless Steel Plate with 3.0mm - 10.0mm Thickness and Corrosion Resistance
Dettagli
| Modello n. | 430 | Forma | Piatto |
|---|---|---|---|
| Tecnica | laminato a freddo | Trattamento superficiale | Luminoso |
| Specifica | 1220*2440, 1500*3000, 1500*6000, 2000*6000 mm | Spessore | laminato a freddo 0,3 - 3,0 mm laminato a caldo 3,0 - 10,0 mm |
| Misura standard | laminato a freddo 1.000*2.000 mm 1.219*2.438 mm laminato a caldo 1.500*6.000 mm | Superficie | 2B BA NO.4 Specchio Hailrline 8K .ecc |
| Resistenza alla trazione | 483 MPa min | Forza di snervamento | 310 MPa min |
| Allungamento | 22% minimo | Durezza | Rockwell B85 massimo, Brinell 183 massimo |
| Densità | 7750kg/m3 | Modulo elastico | 200 GPa |
| Conduttività termica | 26,1 W/mK a 100°C | ||
| Evidenziare | Hot Rolled Stainless Steel Plate,3.0mm - 10.0mm Thickness 430 Stainless Steel Sheet,Corrosion Resistant Ferritic Stainless Steel Plate |
||
Descrizione di prodotto
Hot Rolled 430 Stainless Steel Plate
Available in thicknesses: 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm
Products
430 Stainless Steel Sheet
Thickness
Cold rolled: 0.3-3.0mm
Hot rolled: 3.0-10.0mm
Hot rolled: 3.0-10.0mm
Standard Size
Cold rolled: 1000×2000mm, 1219×2438mm
Hot rolled: 1500×6000mm
Hot rolled: 1500×6000mm
Surface
2B, BA, NO.4, Hairline, Mirror 8K, etc.
Brand
TISCO, JISCO, POSCO, BAOSTEEL
Standard
ASTM A240 / JIS G4305 / EN 10088-2
430 Stainless Steel Introduction
Stainless steel grade 430 is a non-hardenable steel containing straight chromium, belonging to the ferritic group of steels. Known for its good corrosion resistance and formability, coupled with practical mechanical properties, it can be used in various chemical applications.
Grade 430F stainless steel is typically provided in bar form for automatic screw machines, while grade 434 offers similar properties with enhanced corrosion resistance due to molybdenum content.
Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
|---|---|---|---|---|---|---|---|---|---|
| 430 | - 0.12 | - 1 | - 1 | - 0.04 | - 0.030 | 16-18 | - | - 0.50 | - |
| 430F | - 0.12 | - 1.25 | - 1 | - 0.06 | 0.15 - | 16-18 | - | - | - |
Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness Rockwell B (HR B) max | Hardness Brinell (HB) max |
|---|---|---|---|---|---|
| 430 | 483 | 310 | 22 | 85 | 183 |
| 430F | 552 typical | 379 typical | 25 typical | - | 262 |
Physical Properties
| Grade | Density (kg/m³) | Elastic Modulus (GPa) | Thermal Expansion (μm/m/°C) | Thermal Conductivity (W/m.K) | Specific Heat (J/kg.K) | Electrical Resistivity (nΩ.m) |
|---|---|---|---|---|---|---|
| 430 | 7750 | 200 | 10.4 (0-100°C) 11.0 (0-315°C) 11.4 (0-538°C) |
26.1 (at 100°C) 26.3 (at 500°C) |
460 | 600 |
| 430F | 7750 | 200 | 10.4 (0-100°C) 11.0 (0-315°C) 11.4 (0-538°C) |
26.1 (at 100°C) 26.3 (at 500°C) |
460 | 600 |
Performance Characteristics
Corrosion Resistance
All ferritic grades, including stainless steel grade 430, offer excellent stress corrosion cracking resistance. Grade 430 provides good corrosion resistance to numerous substances, with pitting and crevice corrosion resistance similar to grade 304. Corrosion resistance is maximized in well-polished or buffed condition.
Heat Resistance
Stainless steel grade 430 can resist oxidation up to 870°C (1598°F) in intermittent usage and up to 815°C (1499°F) in continuous usage. Proper annealing can overcome brittleness that may occur when heated in the 400-600°C (752-1112°F) range.
Heat Treatment
Solution annealing is performed by heating to 815-845°C (1499-1553°F), followed by slow furnace cooling to 600°C (1112°F) and quick air-cooling. Sub-critical annealing involves heating to 760-815°C (1400-1499°F) followed by air-cooling or water quenching. This stainless steel cannot be hardened by thermal treatment.
Welding
Pre-heating at 150-200°C (302-392°F) is required for welding. Post-weld annealing at 790-815°C (1454-1499°F) can address embrittlement. Recommended filler rods include grade 430, 308L, 309, or 310 based on application requirements.
Machining & Fabrication
Grade 430 offers easier machinability than standard austenitic steels like grade 304, though galling may occur. The low work hardening rate enables easy bending and forming, while the low ductility rate limits rigorous operations. Grade 430F provides enhanced machinability.
Applications
- Dish washer linings
- Refrigerator cabinet panels
- Element supports and fasteners
- Stove trim rings and chimney liners
- Automotive trim and lashing wires
Product Images
Prodotti raccomandati
-
VIDEO
-