Όλα τα Προϊόντα
-
Λουρίδα ανοξείδωτου
-
Φύλλο ανοξείδωτου
-
Πιάτο ανοξείδωτου
-
σωλήνας ανοξείδωτου
-
Φραγμός ανοξείδωτου
-
Γαλβανισμένη σπείρα χάλυβα
-
Πιάτο χάλυβα
-
χάλυβας γύρω από το φραγμό
-
κράμα νικελίου
-
Χωρίς συγκόλληση σωλήνας χάλυβα
-
Ακτίνα ανοξείδωτου
-
Φύλλο πιάτων χαλκού
-
Χαλκός γύρω από το φραγμό
-
stainless steel round bar
-
stainless steel channel bar
-
stainless steel angle bar
-
stainless steel coil strip
-
stainless steel flat bar
-
stainless steel circle
-
Pipe Fitting
-
Water Ripple Stainless Steel Sheet
-
Nickel Alloy and Super Alloy
-
cold rolled steel coil
-
copper
-
Nickel Base Alloy Products
-
Others
-
Raian IonescuΥλική ποιότητα πολύ υψηλή. πρέπει να συνεργαστούμε περισσότερο από 10 έτη. Ανταλλάσσουν τα είδη μερών υλικού χάλυβα. Όλο το υλικό ποιοτικό αγαθό. Αυτοί δασμός για όλη την υλική ποιότητα. Πλανίζουμε συνεχιζόμαστε συνεργαζόμαστε με τους στο μέλλον
Monel 400 Alloy Bar with Cold-Drawing Technique and Bright Surface Treatment in OD 6-300mm
Λεπτομέρειες
| Μοντέλο ΑΡΙΘ. | Μονέλ 400 | Σχήμα | Γύρω |
|---|---|---|---|
| Τεχνική | Ζωγραφική σε κρύο | Επεξεργασία Επιφανειών | Ευφυής |
| Προσδιορισμός | OD 6-300mm | Παραγωγική ικανότητα | 50000 KGS |
| Μέγεθος | 5 mm έως 500 mm | Διάμετρος | 0,1 mm έως 100 mm |
| Μήκος | 100 mm έως 3000 mm | Φινίρισμα | Μαύρο, λαμπερό γυαλισμένο, τραχύ γυρισμένο, φινίρισμα No.4, ματ φινίρισμα, φινίρισμα BA |
| Ανοχή | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 | μορφή | Στρογγυλό, Τετράγωνο, Εξάγωνο (A/F), Ορθογώνιο, Billet, Πλίνθωμα, Σφυρηλάτηση |
| Πυκνότητα | 80,8 g/cm3 | Σημείο Τήξης | 1350 °C (2460 °F) |
| Αντοχή εφελκυσμού | Psi - 80.000, MPa - 550 | ||
| Επισημαίνω | Cold-Drawing Technique Monel Bar,Bright Surface Treatment Monel 400 Alloy Bar,OD 6-300mm Nickel Alloy Bar |
||
Περιγραφή προϊόντων
Monel Bar Monel 400 Alloy Bar
ASTM B164 UNS N04400/NS111 DIN 2.4360 Alloy 400 Monel 400 Round Steel Bar
- MONEL ALLOY 400 Bar, ASTM B164 Monel 400 Round Bars, Monel UNS N04400 Bright Bar, 400 Monel Triangular Bar, Monel 28-2,5-1,5 Round Bar, Monel Alloy 400 Rods Suppliers
Monel 400 Round Bar Specifications
| Specifications | ASTM B164 / ASTM SB164 |
|---|---|
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size | 5 mm To 500 mm |
| Diameter | 0.1 mm to 100 mm |
| Length | 100 mm To 3000 mm Long & Above |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients' requirements |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
Monel 400 Bars Product Types
| Product Type | Variants |
|---|---|
| Monel 400 Bright Bar | Monel® 400 Bright Bar, 400 Monel Bright Bar, Monel Alloy 400 Bright Bar, UNS N04400 Monel Bright Bar, WERKSTOFF NR. 2.4360 Bright Bar, ASTM B164 400 Monel Bright Bar |
| Monel 400 Hex Bar | Monel® 400 Hex Bar, 400 Monel Hexagonal Bar, 400 Monel Alloy Hex Bar, UNS N04400 Monel Hexagonal Bar, ASTM B164 400 Monel Hex Bar |
| Monel 400 Square Bar | Monel® 400 Square Bar, 400 Monel Square Bars, 400 Monel Alloy Square Bar, UNS N04400 Monel Square Bar, WERKSTOFF NR. 2.4360 Square Bar, ASTM B164 400 Monel Square Bars |
| Monel 400 Rectangular Bar | Monel® 400 Rectangular Bar, 400 Monel Rectangular Bars, 400 Monel Alloy Rectangular Bar, UNS N04400 Monel Rectangular Bars, WERKSTOFF NR. 2.4360 Rectangular Bar, ASTM B164 400 Monel Rectangular Bar |
| Monel 400 Flat Bars | Alloy 400 Flat Bar, 400 Monel Alloy Flat Bars, 400 Monel Flat Bars, UNS N04400 Monel Flat Bars, WERKSTOFF NR. 2.4360 Flat Bars, ASTM B164 400 Monel Flat Bars |
| Monel 400 Polished Bar | Monel® 400 Polished Bar, 400 Monel Polished Bars, 400 Monel Alloy Polished Bar, UNS N04400 Monel Polished Bars, WERKSTOFF NR. 2.4360 Polished Bar, ASTM B164 400 Monel Polished Bar |
| Monel 400 Threaded Bar | Alloy 400 Threaded Bar, 400 Monel® Threaded Bars, 400 Monel Alloy Threaded Bar, UNS N04400 Monel Threaded Bar, WERKSTOFF NR. 2.4360 Threaded Bar, ASTM B164 400 Monel Threaded Bar |
Other Round Bar Products
General Specifications
| Product Types | Round Bar, Square Bar, Hexagon Bar, Flat Bar |
|---|---|
| Surface | Black or Bright or Pickling White |
| Standard | SUS, AISI, DIN |
| Manufacture Technique | Hot Rolling, Cold-drawing |
| Diameter | 5~500mm |
| Length | <=12M or As Per Client's Requirements |
| Diameter Tolerance | H7 H9 H10 H11 |
Available Alloy Standards
| Standard | Alloy Types |
|---|---|
| ASTM/ASME SB 446 | Alloy 625/UNS N06625 |
| ASTM/ASME SB164 | Monel 400/Alloy 400/UNS N04400 |
| ASTM/ASME SB 408 | Alloy 800HT/Incoloy 800HT/UNS N08811, Alloy 800/Incoloy 800/UNS N08800, Alloy 800H/Incoloy 800H/UNS N08810 |
| ASTM/ASME SB 649 | Alloy 925/Incoloy 925/UNS N09925, Alloy 926/Incoloy 926/UNS N08926, Alloy 31/UNS N08031 |
| ASTM/ASME SB 166 | Alloy 600/Inconel 600/UNS N06600, Alloy 601/Inconel 601/UNS N06601 |
| ASTM/ASME SB160 | Alloy 200/UNS N02200, Alloy 201/UNS N02201 |
| ASTM/ASME SB 472 | Hastelloy C-276/UNS N10276, Alloy 926/Incoloy 926/UNS N08926, Alloy 31/UNS N08031, Alloy 20/N08020, Alloy C-22/Hastelloy C-22/N06022, Alloy 600/Inconel 600/UNS N06600 |
| ASTM/ASME SB 473 | Alloy 20/UNS N08020 |
| ASTM/ASME SB 574 | Hastelloy C-276/UNS N10276 |
| ASTM/ASME SB 637 | Alloy 718/Inconel 718/N07718 |
| Stainless Steel ASTM/ASME SA 276 | 304/SUS304/UNS S30400, 304L/UNS S30403, 316/UNS S31600, 316Ti/UNS S31635, 316H/UNS S31609, 316L/UNS S31603, 310S/UNS S31008, 321/UNS S32100, 321H/UNS S32109, 347/UNS S34700, 347H/UNS S34709, F51/S31803/2205, F53/S32750/2507, F55/S32760, F44/S31254/254SMO, S31050/1.4466, F904L/N08904 |
| ASTM/ASME SA 479 | 304H/UNS S30409 |
| Carbon Steel and Low Alloy Steel ASTM/ASME SA 694 | F42, F46, F48, F50, F52, F56, F60, F65, F70 |
| ASTM/ASME SA 350 | LF2, LF3, ASTM A105/ASME SA105 |
Monel 400 Alloy Technical Data
Chemical Composition
| Grade | C | Mn | Si | Cu | Fe | Ni | S |
|---|---|---|---|---|---|---|---|
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 28.00 - 34.00 | 2.50 max | 63.00 min | 0.024 max |
Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2% Offset) | Elongation |
|---|---|---|---|---|
| 8.8 g/cm³ | 1350 °C (2460 °F) | Psi - 80,000, MPa - 550 | Psi - 35,000, MPa - 240 | 40% |
Equivalent Grades
| Standard | Werkstoff Nr. | UNS | JIS | GOST | BS | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| Monel 400 | 2.4360 | N04400 | NW 4400 | МНЖМц 28-2,5-1,5 | NA 13 | NU-30M | NiCu30Fe |
Quality Assurance & Testing
We provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirements like NACE MR 01075. Ferrite content as per norms if requested by clients.
Certification & Documentation
- EN 10204/3.1B
- Raw Materials Certificate
- 100% Radiography Test Report
- Third Party Inspection Report
Material Testing Services
- Mechanical Testing Such as Tensile of Area
- Hardness Test
- Chemical Analysis - Spectro Analysis
- Positive Material Identification - PMI Testing
- Flattening Test
- Micro and Macro Test
- Pitting Resistance Test
- Flaring Test
- Intergranular Corrosion (IGC) Test
Documentation Provided
- Commercial Invoice which includes HS Code
- Packing List including net weight and gross weight, number of boxes, Marks and Numbers
- Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
- Fumigation Certificates
- Raw Material Test Reports
- Material Traceability Records
- Quality Assurance Plan (QAP)
- Heat Treatment Charts
- Test Certificates certifying NACE MR0103, NACE MR0175
- Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
- Guarantee Letter
- NABL approved Laboratory Test Reports
- Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
- Form A for the purposes of the Generalized System of Preferences (GSP)
Συνιστώμενα προϊόντα