Tous les produits

Raian Ionescu

Qualité matérielle très bonne. nous avons pour coopérer plus de 10 ans. Ils commercent des genres de sorts de matériel en acier. Toute la qualité matérielle bonne. Ils devoir pour toute la qualité matérielle. Nous surfaçons pour continuer à coopérer avec eux à l'avenir

Personne à contacter : Gao

Numéro de téléphone : 18068357371

Whatsapp : +8618068357371

ASTM Standard C11000 Copper Flat Bar EN 10204-3.1 Certificated Flat Copper Plate

Quantité de commande min	500KG
Prix	US $8.2-8.5 / kg

Détails sur le produit

Numéro de modèle.	C11000	Forme	plaque
Alliage	Non-allié	Taille	103-20040 ou comme demande
Longueur	2-6m	Qualité du cuivre	C11000, C10100, C12200 H59, H60, H62, H65, H68, H70, H80, H85, H90, H96, C2100, C2200, C2300, C2400,
Taille de la barre ronde	6mm - 200mm	Taille de la barre carrée	4x4mm - 200x200mm
Taille de la barre hexagonale	8x8mm - 100x100mm	Taille des barres plates	20x2mm - 200x20mm
Traitement	Extrusion/étiré à froid	Caractère	1/4 dur, 1/2 dur, 3/4 dur, dur, doux
Finition de surface	Moulin, poli, brillant, huilé, ligne de cheveux, pinceau, miroir, explosion de sable ou si nécessair	Contenu en cuivre	99.90 min
Teneur en oxygène	0,02% à 0,04%
Mettre en évidence	ASTM Standard Copper Flat Bar , C11000 Flat Copper Plate , EN 10204-3.1 Certificated Copper Plate

Laisser un message

Description de produit

Cu-ETP Copper Flat Bar ASTM Standard C11000

Product Specifications

Product Name	Copper Flat Bar
Copper & Copper Alloy Grades	C11000, C10100, C12200, H59-H96 series, C2100-C2800 series, and various other copper-zinc alloys
Available Sizes	Round Bar: 6mm - 200mm Square Bar: 4x4mm - 200x200mm Hex Bar: 8x8mm - 100x100mm Flat Bar: 20x2mm - 200x20mm
Standard Lengths	2m, 3m, 5.8m, 6m, or custom lengths as required
Processing Method	Extrusion/Cold Drawn
Temper Options	1/4 Hard, 1/2 Hard, 3/4 Hard, Hard, Soft
Surface Finishes	Mill, polished, bright, oiled, hair line, brush, mirror, sand blast, or as required
Certification	EN 10204-3.1 Certified

Material Description

C11000 Electrolytic Tough Pitch (ETP) Copper Rod or Solid Bar is available in a comprehensive range of sizes and can be cut to custom lengths.

C11000 ETP Copper is manufactured through direct conversion of selected refined cathodes and castings under strictly controlled conditions to prevent contamination. This production method ensures an extra high-grade metal with 99.99% copper content, bringing forth the inherent properties of elemental copper to their fullest potential.

This is the most commonly used copper alloy, universally applicable for electrical applications. ETP copper maintains a minimum conductivity rating of 100% IACS with 99.9% purity and typical oxygen content of 0.02% to 0.04%. Most ETP copper today meets or exceeds the 101% IACS specification.

Chemical Composition

Element	Content (% max., unless shown as range or min.)
Cu	99.90 min
O	0.04 nominal

Mechanical Properties

Temper	Tensile Strength (ksi/MPa)	Yield Strength (ksi/MPa)	Elongation (%)	Hardness
H02	42 / 290	36 / 248	14	Rockwell B 40
M20	32 / 221	10 / 69	50-55	Rockwell F 40
H04	50-55 / 345-379	45-50 / 310-345	6-10	Rockwell B 50-60
H08	55 / 379	50 / 345	4	Rockwell B 60

Applications

Building Components: Fronts, downspouts, flashing, gutters, roofing, skylight frames
Hardware: Gaskets, radiators, ball floats, butts, cotter pins, nails, rivets
Electrical: Bus bars, conductors, contacts, magnet wire, switches, terminals
Industrial: Chemical process equipment, heat exchangers, kettles, pressure vessels
Various other applications including screening, Christmas ornaments, and fasteners

Available Forms