Heat Resistant S31008 / 1.4845 / 310S Stainless Steel Plate 4ft*8ft 5ft*10ft SS Plate With EN 10204-3.1 Certificate

Heat Resistant S31008 / 1.4845 / 310S Stainless Steel Plate – 4ft×8ft & 5ft×10ft SS Plate with EN 10204-3.1 Certificate

Introduction

When extreme temperatures, aggressive atmospheres, and long-term reliability are critical, S31008 (also known as 310S or 1.4845) stainless steel stands out as one of the most trusted high-alloy austenitic grades in industrial applications. Engineered for superior oxidation resistance up to 1035°C (1900°F), this material combines high chromium (25%) and nickel (20%) content to deliver exceptional performance in continuous high-heat environments.

We supply certified heat-resistant 310S stainless steel plates in standard large sizes—4ft × 8ft (1219 × 2438 mm) and 5ft × 10ft (1524 × 3048 mm)—ideal for fabrication, machining, welding, or direct use in demanding sectors such as petrochemical, power generation, aerospace, and industrial furnace manufacturing. Every plate comes with a full EN 10204 3.1 Mill Test Certificate, ensuring traceability, compliance, and confidence in material integrity.

Why Choose 310S (S31008 / 1.4845) Stainless Steel?

310S is the low-carbon variant of Type 310 stainless steel, specifically designed to minimize carbide precipitation during welding and high-temperature service. This makes it ideal for applications requiring prolonged exposure to elevated temperatures without sensitization or intergranular corrosion.

Key advantages include:

• Outstanding resistance to oxidation and scaling in air up to 1035°C
• Excellent creep strength and structural stability under thermal cycling
• Good resistance to sulfidation and molten salt corrosion
• Non-magnetic in annealed condition
• Fully weldable using common techniques (TIG, MIG, SMAW)

Its balanced composition ensures durability where other stainless grades would rapidly degrade.

Material Designations & Equivalents

This global recognition ensures seamless integration into international supply chains and engineering specifications.

Chemical Composition (Per ASTM A240 / EN 10088-2)

The controlled carbon level (<0.08%) prevents chromium carbide formation at grain boundaries, preserving corrosion resistance after welding or high-temp exposure.

Mechanical Properties (Annealed Condition)

These properties support both structural integrity and thermal shock resistance—critical for components like radiant tubes, muffles, and burner nozzles.

Available Plate Dimensions & Specifications

We stock and supply hot-rolled 310S stainless steel plates in two popular large-format sizes, suitable for cutting, shearing, or laser profiling:

All plates are manufactured in ISO 9001-certified mills and undergo ultrasonic testing upon request.

What Is an EN 10204 3.1 Certificate?

The EN 10204 3.1 certificate is a globally recognized quality document that provides:

• Full chemical composition per heat number
• Actual mechanical test results (tensile, yield, elongation)
• Compliance statement with relevant standards (e.g., ASTM A240, EN 10088-2)
• Manufacturer’s declaration of conformity
• Traceability from raw material to final product

This certificate is mandatory for projects in pressure equipment (PED 2014/68/EU), nuclear, oil & gas, and aerospace industries—ensuring your 310S plates meet stringent safety and performance criteria.

Comparison: 310S vs. Other Heat-Resistant Alloys

For most industrial heating applications below 1050°C, 310S offers the best balance of cost, fabricability, and longevity—especially when certified material traceability is required.

Common Industrial Applications

Thanks to its dual capability as a high-temperature structural alloy and corrosion-resistant material, 310S plates are used across critical sectors:

• Industrial Furnaces: Retorts, muffles, radiant tubes, hearth plates
• Heat Treatment Equipment: Baskets, trays, fixtures, sintering boats
• Power Plants: Superheater supports, boiler baffles, flue gas ducts
• Chemical & Petrochemical: Reactor linings, catalyst support grids, reformer tubes
• Waste Incineration: Combustion chambers, grates, ash handling systems
• Automotive & Aerospace: Exhaust manifolds, turbine shrouds, afterburner parts

Large 4ft×8ft and 5ft×10ft plates allow for efficient nesting of multiple components, reducing waste and fabrication time.

Fabrication & Machining Guidelines

While 310S is tougher than standard 304/316 grades due to its high alloy content, it can be successfully processed with proper techniques:

• Cutting: Plasma, laser, or waterjet recommended. Oxy-fuel not suitable.
• Machining: Use rigid setups, sharp tools, low speeds, and high lubrication. Expect work hardening.
• Welding: No preheat required. Use matching filler (ER310 or 310MoLN). Post-weld annealing usually unnecessary.
• Forming: Good ductility allows bending and rolling—springback is higher than mild steel.
• Heat Treatment: Solution anneal at 1040–1150°C followed by rapid quenching if needed.

Our technical team can provide design-for-manufacturing (DFM) support to optimize your part layout on standard plate sizes.

Quality Assurance & Testing

Every batch of our 310S plates undergoes rigorous quality control:

✅ Positive Material Identification (PMI) via XRF
✅ Tensile & hardness testing per ASTM E8/E18
✅ Ultrasonic testing (UT) for internal defects (optional)
✅ Dimensional inspection (thickness tolerance ±0.1–0.3 mm depending on gauge)
✅ Full EN 10204 3.1 certification with heat number traceability

We also offer third-party inspection (e.g., SGS, Bureau Veritas) upon request.

Packaging & Delivery

To ensure safe transit and prevent surface damage or moisture exposure:

• Plates are wrapped in anti-corrosion VCI paper
• Bundled with steel straps and labeled with grade, size, heat number, and certificate reference
• Export shipments packed in fumigated wooden crates (ISPM 15 compliant)
• Global shipping via sea, air, or land with real-time tracking

Lead times:

• Stock items: 3–7 days
• Custom thickness or finish: 2–4 weeks

Sustainability & Recyclability

310S stainless steel contains up to 70% recycled content and is 100% recyclable at end-of-life. Our supply chain adheres to responsible sourcing principles, and all processing waste (e.g., cut-offs) is returned to certified scrap recyclers—supporting circular economy goals.

Ordering Information

To place an order or request a quote, please specify:

1. Grade: Confirm S31008 / 310S / 1.4845
2. Dimensions: e.g., 4ft×8ft × 12mm or 5ft×10ft × 25mm
3. Quantity: Number of plates or total weight (kg/tons)
4. Surface Finish: Hot-rolled (standard), pickled, or brushed
5. Certification: EN 10204 3.1 (included); additional tests if needed
6. Destination: For accurate freight calculation

Conclusion

For engineers and procurement professionals seeking certified, high-performance stainless steel for extreme environments, our S31008 / 1.4845 / 310S plates in 4ft×8ft and 5ft×10ft sizes offer unmatched reliability, global standard compliance, and full material traceability through EN 10204 3.1 certification.

Backed by decades of metallurgical expertise, ISO-certified production, and responsive customer service, we ensure your project receives material that performs—every time.

Contact us today for a competitive quote, CAD-ready data sheets, or technical consultation on your next high-temperature application.

310S stainless steel plate 4x8, S31008 plate 5x10 ft, 1.4845 stainless steel sheet EN 10204 3.1, heat resistant 310S plate, certified 310S stainless steel, 06Cr25Ni20 plate supplier, large size 310S SS plate, ASTM A240 310S plate, furnace grade stainless steel plate, mill test certificate 3.1 stainless steel.