Όλα τα Προϊόντα

Raian Ionescu

Υλική ποιότητα πολύ υψηλή. πρέπει να συνεργαστούμε περισσότερο από 10 έτη. Ανταλλάσσουν τα είδη μερών υλικού χάλυβα. Όλο το υλικό ποιοτικό αγαθό. Αυτοί δασμός για όλη την υλική ποιότητα. Πλανίζουμε συνεχιζόμαστε συνεργαζόμαστε με τους στο μέλλον

Υπεύθυνος Επικοινωνίας : Gao

Τηλεφωνικό νούμερο : 18068357371

Whatsapp : +8618068357371

304 Stainless Steel Etched Sheet Cold Rolled with Bright Surface and Corrosion Resistance

Πιστοποίηση	ISO, AISI, ASTM
Ποσότητα παραγγελίας min	50 κιλά
Τιμή	US $1.35-3.55 / kg

Λεπτομέρειες

Μοντέλο ΑΡΙΘ.	304	Σχήμα	Επίπεδα
Τεχνική	ψυχρής έλασης	Επεξεργασία Επιφανειών	Ευφυής
Cr Περιεχόμενο	18%	Περιεκτικότητα σε Νι	8%
Προσδιορισμός	12202440, 15003000, 15006000, 20006000mm	Αντοχή εφελκυσμού	≥ 520 MPa
Ισχύς απόδοσης	≥ 205 MPa	Επιμήκυνση	≥40%
Διακένωση τμημάτων	≥ 60%	Σκληρότητα	≤ 187HB; ≤ 90HRB; ≤ 200HV
Σημείο Τήξης	1398 ~ 1454 ºC	Θερμική αγωγιμότητα	16,3 ~ 21,5 W/mK
Γραμμική επέκταση	17,2 ~ 18,4 κ
Επισημαίνω	Cold Rolled Stainless Steel Sheet , Bright Surface 304 Stainless Steel Sheet , Corrosion Resistant Etched Stainless Steel Sheet

Αφήστε ένα μήνυμα

Περιγραφή προϊόντων

304 Stainless Steel Etched Sheet SUS304 Stainless Steel Sheet Etched

ASTM A240 2B 304 stainless steel sheet with various surface treatment options for comprehensive industrial applications.

Surface Treatment Options

Surface Finish	Characteristics and Application
NO.2B	Better surface brightness and flatness than NO.2D. Through special surface treatment to improve mechanical properties, nearly satisfies comprehensive uses.
NO.1	Surface finished by heat treatment and pickling or corresponding processes after hot rolling.
NO.4	Polished with abrasive belt of grit #150-#180, better brightness with discontinuous coarse striations. Used for bathtubs, building ornaments, electrical appliances, kitchen utensils, and food processing equipment.
HL	Polished with abrasive belt of grit #150-#320 on NO.4 finish with continuous streaks. Mainly used for building ornaments, elevators, building doors, and frontal plates.
BA	Cold rolled, bright annealed and skin-passed. Excellent brightness and good reflexivity like mirror. Suitable for kitchen apparatus and ornaments.
8K	Excellent brightness and preferred reflexivity, can be used as mirror.

Chemical Composition

C: ≤0.08, Si: ≤1.0, Mn: ≤2.0, Cr: 18.0~20.0, Ni: 8.0~10.0, S: ≤0.03, P: ≤0.045

Physical Properties

Property	Value	Property	Value
Tensile strength σb (MPa)	≥ 520	Specific heat capacity (0~100°C, KJ/kgK)	0.50
Yield strength σ0.2 (MPa)	≥ 205	Thermal conductivity (W/m·K)	16.3 (100°C), 21.5 (500°C)
Elongation δ5 (%)	≥ 40	Linear expansion coefficient	17.2 (0~100°C), 18.4 (0~500°C)
Section shrinkage ψ (%)	≥ 60	Resistivity (20°C, 10⁻⁶ Ω·m)	0.73
Hardness	≤ 187HB; ≤ 90HRB; ≤ 200HV	Longitudinal elastic modulus (20°C, KN/mm²)	193
Melting point (°C)	1398 ~ 1454	Specific heat capacity	0.50

Corrosion Resistance

Stainless steel's resistance to corrosion and staining, low maintenance requirements, and familiar luster make it an ideal material for many applications. The alloy is used in cookware, cutlery, household hardware, surgical instruments, major appliances, industrial equipment, and as an automotive and construction material in large buildings. It is particularly suitable for commercial kitchens and food processing plants, as it can be steam-cleaned and sterilized without needing paint or other surface finishes.

Applications

Food preparation equipment, especially in chloride environments
Chemical processing equipment
Laboratory benches and equipment
Rubber, plastics, pulp & paper machinery
Pollution control equipment
Boat fittings, valves and pump trim

Product Images

Ετικέττες:

304 Stainless Steel Etched Sheet Cold Rolled with Bright Surface and Corrosion Resistance

Cold Rolled Stainless Steel Sheet

Bright Surface 304 Stainless Steel Sheet

Corrosion Resistant Etched Stainless Steel Sheet